Bim and Model Making Services Contractors in Alabama

321 Results

Market Sector
Company Type
Business Classification
Trades and Services (2)
3d Capture Scanning
Bim and Model Making Services
Company Logo

US BIM Inc

Abilene, TX • Absecon, NJ • Acton, MA • Acworth, GA • Ada, MI • Ada, OH • Ada, OK • Addison, IL • Adel, GA • Aelbeokeoki, NM • Aellingteon, TX • Aetna Twp, MI • Akron, MI • Akron, NY • Akron, OH • Akron, PA • Ann Arbor, MI • Aransas Pass, TX • Arlington, TX • Arlington, VA • Athens, GA • Athens, OH • Athens, ON • Atlanta, GA • Aubrey, TX • Auburn, AL • Auburn, CA • Auburn, NY • Auburn, WA • Austell, GA • Austin, IN • Austin, MN • Austin, TX • Bellevue, WA • Bemus Point, NY • Bend, OR • Benton City, WA • Benton, AR • Benton, IL • Benton, KY • Bentonville, AR • Berkeley, CA • Bethlehem, PA • Billerica, MA • Billings, MT • Billings, ON • Biloxi, MS • DC, DC • Dallas, GA • Dallas, TX • Dallaseu, AB • Dalton, GA • Daly City, CA • Dana Point, CA • Denison, TX • Denton, MD • Denton, TX • Denver, CO • Denver, NC • Detan, OH • Detour Twp, MI • Detroit Lakes, MN • Detroit, ME • Detroit, MI • Eagle Pass, TX • El Monte, CA • El Paso, TX • Filadelfia, PA • Florence, AL • Florence, KY • Florence, SC • Florissant, MO • Fort Erie, ON • Fort Lauderdale, FL • Fort Myers, FL • Fort Washington, MD • Fort Wayne, IN • Fort Worth, TX • Grants Pass, OR • Gulf Breeze, FL • Gulf Shores, AL • Gulfport, MS • Hamilton, ON • High Point, NC • Houston, TX • Hunt, TX • Huntington Beach, CA • Huntington, WV • Huntsville, AL • Ijamsville, MD • Indianapolis, IN • Jackman, ME • Jackson, MI • Jackson, MS • Jackson, TN • Jacksonville, FL • Kansas City, MO • Klamath Falls, OR • Kleevalaind, OH • Kline Twp, PA • Kline, SC • LA, CA • La Vergne, TN • Lake Zurich, IL • Las Cruces, NM • Las Vegas, NV • Lehigh Acres, FL • Little Elm, TX • Little Falls, NJ • Little Rock, AR • Long Beach, CA • Long Island City, NY • Longmont, CO • Longview, TX • Longwood, FL • Lonoke, AR • Los Altos, CA • Los Angeles, CA • Los Banos, CA • Los Gatos, CA • Lost Hills, CA • Miami Beach, FL • Miami, FL • Miami, OK • Mobile City, TX • Mobile, AL • Montgomery, AL • New Orleans, LA • New York, NY • Newark, NJ • North Billerica, MA • North Las Vegas, NV • North Little Rock, AR • North Miami Beach, FL • Opa-Locka, FL • Opelika, AL • Opelousas, LA • Opp, AL • Orland Park, IL • Orlando, FL • Paris, IL • Paris, KY • Paris, TN • Paris, TX • Pass Christian, MS • Passaic, NJ • Pensacola, FL • Pensacola, OK • Philadelphia, PA • Point, TX • Port Charlotte, FL • Port Huron, MI • Portland, ME • Portland, OR • Queens, NY • San Antonio, TX • San Diego, CA • San Francisco, CA • San Jose, CA • Seabrook, TX • Seal Beach, CA • Sealy, TX • Searcy, AR • Seattle, WA • Simi Valley, CA • Sonora, CA • St Francois Xavier, MB • St Paul, MN • Tampa, FL • Toronto, ON • Tulsa, OK • Tuscaloosa, AL • Tuscola, IL • Tuscola, TX • Tuscumbia, AL • Tuskegee, AL • Tuson, AZ • Tustin, CA • Union, NJ • University Park, PA • Ute, IA • Utica, MI • Utica, NY • Vergas, MN • Vergennes Twp, MI • Vergennes, IL • Vergennes, VT • Virgin, UT • Virginia Beach, VA • Virginia, MN • Waco, TX • Washington, DC • Washington, GA • Washington, PA • Waterloo, ON • Wilmot, ON • Xenia, IL • Xenia, OH • Xi Ya Tu, WA • York, PA • Zanesville, OH • Alabama • Alaska • Arizona • Arkansas • California • Colorado • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Manitoba • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nevada • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oregon • Pennsylvania • Rhode Island • South Carolina • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin
Consultant, Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional, Residential
3d Capture Scanning, Bim and Model Making Services, Building Information Modeling Bim
US BIM Inc., classified under drafting services, is a comprehensive 3D modeling and clash coordination firm. We specialize in creating precise 3D parametric models based on 2D construction documents. While proficient in all CAD-based software, we exclusively model in Autodesk Revit to ensure accuracy and consistency. ​Our top priority is to deliver 100% accurate, high-quality, clash-free 3D models, fabrication shop drawings, and Spool drawings, specifically for the MEP trades. We collaborate with mechanical, plumbing, electrical, and fire sprinkler professionals, preferring to model all trades simultaneously while accommodating individual requests as needed.
Company Logo

M.J. Harris Construction Services, LLC

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
General Contractor
Commercial, Healthcare, Institutional
3d Capture Scanning, Building Information Modeling Bim, Estimating, General Construction Management, Preconstruction Bidding
M.J. Harris Construction Services, LLC was founded in 1995 for a single purpose: to provide Owners with a highly skilled group of professional constructors who are committed to the process of delivering highly successful projects. As one of the premier Healthcare CM / GCs in the Country, M.J. Harris provides exceptional comprehensive preconstruction and Construction services to our clients in the Healthcare and Institutional market sectors. We service our clients and specialize in both new ground-up “greenfield” projects as well as intricate renovation projects within fully operational facilities. In either case, M.J. Harris has the trained, experienced staff to carry out the effort and ensure success. Many of our team members are ASHE and CHC certified, and all are well versed in ILSM and ICRA procedures and processes, MEP and special systems as well as safety which is always held paramount and vital for a projects success. Our team of construction experts have successfully completed Healthcare projects of all types including: acute care hospitals, rehabilitation hospitals, women & children’s hospitals, behavioral health facilities, oncology centers, MOBs, outpatient surgery and imaging centers as well as emergency departments to name just a few. Since our inception, our teams have built tens of millions of square feet in over forty (40) States and have served as CM/GC on over 750 projects totaling $7.2 billion in Healthcare construction throughout the Country. We have completed projects ranging in size from $150,000 to $150,000,000 and we understand what healthcare providers need in order to provide highest levels of quality, patient-centered care. M.J. Harris currently employs over 120 employees through our three (3) strategic offices with disciplines ranging from administration to safety, preconstruction services, building information modeling (BIM / VDC) and field operations.
Company Logo

RBS Dynamic LLC

New York, NY • Washington, DC • Alabama • Arizona • Arkansas • California • Colorado • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Brunswick • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Ontario • Oregon • Pennsylvania • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Consultant, Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Institutional, Residential
3d Capture Scanning, Bim and Model Making Services, Building Information Modeling Bim
RBS Dynamic is a Utah-based construction technology firm specializing in fabrication-ready MEP coordination, BIM/VDC services, and practical AI implementation for the construction industry. We coordinate to LOD 350–400 — models built so fabricators can build directly from our deliverables without re-engineering. Our team has delivered on data centers, hospitals, semiconductor facilities, and complex commercial projects across the Mountain West. Our standard is simple: if the field isn't using it, it failed. Every engagement is measured by field adoption, not clash counts. Services include MEP coordination, multi-trade clash detection, fabrication-level modeling, scan-to-BIM, BIM implementation consulting, and AI readiness assessments. Founded by industry veterans with 50+ combined years in construction and technology — including hands-on superintendent and project management experience, and a prior exit to Trimble.
Company Logo

Virtual Design Construction Solutions

Alabama • Florida • Georgia • New Jersey • New York • North Carolina • Pennsylvania • South Carolina • Virginia
Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Institutional
3d Capture Scanning, Bim and Model Making Services, Building Information Modeling Bim
At Virtual Design Construction Solutions (VDCS), we are a full-service BIM Design firm dedicated to transforming the way construction projects are envisioned, planned, and executed. With a strong focus on innovation and precision, we provide comprehensive Building Information Modeling (BIM) services that drive efficiency, reduce costs, and enhance collaboration across all phases of the construction lifecycle. Our Mission Our mission is to deliver cutting-edge BIM solutions that streamline design, coordination, and construction processes. We aim to bridge the gap between architecture, engineering, and construction by providing accurate models and data-driven insights that ensure project success from concept to completion. What We Do VDCS offers a full range of BIM services, including: • 3D Modeling & Visualization • Clash Detection & Coordination • Scan-to-BIM & As-Built Modeling • Construction Documentation & Detailing • BIM Consulting & Implementation Strategies Our team works closely with architects, engineers, contractors, and project stakeholders to create seamless workflows, ensuring every detail aligns with project goals and industry standards. Why Choose VDCS? • Expertise: Our team of seasoned BIM professionals brings deep industry knowledge and technical skill to every project. • Innovation: We leverage the latest BIM technologies and methodologies to deliver accurate, high-quality models that support informed decision-making. • Collaboration: At VDCS, we prioritize open communication and coordination to foster strong relationships with all project partners. • Efficiency: Our streamlined processes help reduce rework, minimize delays, and optimize resources, saving time and money. Our Commitment At VDCS, we are committed to excellence, integrity, and client satisfaction. Whether working on small-scale developments or large, complex projects, we approach each task with the same dedication to delivering high-quality results that exceed expectations.
Company Logo

3D Geomatic Services (3DGS)

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Consultant
Commercial, Infrastructure, Institutional
3d Capture Scanning, Bim and Model Making Services, Building Information Modeling Bim
3D Geomatic Services (3DGS) is a surveyor-led point cloud processing firm for US survey and AEC firms. You scan, we model it: registered point clouds, BIM models, CAD and as-built drawings, in your own families and template at LOD 100 to 500. Our modelers work alongside a LiDAR survey team that does field work too, so registration issues, control problems and bad scans get flagged when your files arrive, not after we've modeled against them. We have been doing this since 2015, with projects in 21 countries, including the Montana State Capitol, the Waldorf Astoria in New York, Google Campus and Palm Beach International Airport. LiDAR only, terrestrial-led with aerial support. Not photogrammetry. Every job is scoped in hours, billed on what we use, capped at the quote. Revisions to reach your client's sign-off sit inside the cap, and we can work white-label. Fourth State LLC dba 3D Geomatic Services is registered in Washington State; the processing team is in New Delhi, India.
Company Logo

Goodman & Company

NY, NY • Washington, DC • Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Consultant, General Contractor, Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional, Residential
Bim and Model Making Services, Civil Design and Engineering, Commissioning, Concrete, Construction Scheduling, Construction Software Solutions, Curbs and Gutters, Curbs Gutters Sidewalks and Driveways, Demolition, Design and Engineering, Design Coordination Services, Driveways, Earthwork, Erosion and Sedimentation Controls, Estimating, Excavation and Fill, Exterior Specialties, General Construction Management, Geotechnical Investigations, Grading, Integrated Construction, Job Site Data Collection and Reporting, Paving and Surfacing, Paving Specialties, Preconstruction Bidding, Project Management, Project Management and Coordination, Sidewalks, Site Clearing, Site Controls, Surveying
Goodman & Company is a Consultant, General Contractor, Specialty Contractor that serves the Auburn, AL area and specializes in BIM and Model Making Services, Civil Design and Engineering, Commissioning, Concrete, Construction Scheduling, Construction Software Solutions, Curbs and Gutters, Curbs Gutters Sidewalks and Driveways, Demolition, Design and Engineering, Design Coordination Services, Driveways, Earthwork, Erosion and Sedimentation Controls, Estimating, Excavation and Fill, Exterior Specialties, General Construction Management, Geotechnical Investigations, Grading, Integrated Construction, Job Site Data Collection and Reporting, Paving and Surfacing, Paving Specialties, Preconstruction Bidding, Project Management, Project Management and Coordination, Sidewalks, Site Clearing, Site Controls, Surveying.
Company Logo

Process Barron (Process Equipment/Barron Industries)

Pelham, AL
Consultant, Engineer, General Contractor, Specialty Contractor, Supplier
Commercial, Industrial and Energy, Infrastructure
3d Capture Scanning, Access Doors and Panels, Air Barriers, Bulk Material Processing Equipment, Combustion System Gas Piping, Commercial Equipment, Commissioning, Construction Scheduling, Demolition, Design and Engineering, Design Coordination Services, Estimating, Expansion Control, Fabricated Engineered Structures, General Construction Management, Industry Specific Manufacturing Equipment, Louvered Equipment Enclosures, Louvers, Manufacturing Equipment, Mechanical Design and Engineering, Metal Fabrications, Metals, Project Management, Project Management and Coordination, Structural Design and Engineering, Structural Steel, Structural Steel Framing Erection, Structural Steel Framing Fabrication, Structure Demolition
Process Barron (Process Equipment/Barron Industries) is a Consultant, Engineer, General Contractor, Specialty Contractor, Supplier that serves the Pelham, AL area and specializes in 3d Capture Scanning, Access Doors and Panels, Air Barriers, Bulk Material Processing Equipment, Combustion System Gas Piping, Commercial Equipment, Commissioning, Construction Scheduling, Demolition, Design and Engineering, Design Coordination Services, Estimating, Expansion Control, Fabricated Engineered Structures, General Construction Management, Industry Specific Manufacturing Equipment, Louvered Equipment Enclosures, Louvers, Manufacturing Equipment, Mechanical Design and Engineering, Metal Fabrications, Metals, Project Management, Project Management and Coordination, Structural Design and Engineering, Structural Steel, Structural Steel Framing Erection, Structural Steel Framing Fabrication, Structure Demolition.

Johnson

Alabama
General Contractor
Commercial, Industrial and Energy, Infrastructure, Institutional
Bim and Model Making Services, Ceilings, Concrete, Countertops, Curtain Wall and Glazed Assemblies, Demolition, Design and Engineering, Door and Window Hardware, Doors and Frames, Dumbwaiters, Earthwork, Electrical, Electronic Security, Elevators, Entrances and Storefronts, Escalators and Moving Walks, Finish Carpentry, Flooring, General Construction Management, Glass and Glazing, Heating Ventilating and Air Conditioning HVAC, Landscaping, Lifts, Louvers, Masonry, Metals, Other Conveying Equipment, Painting and Coatings, Plaster and Gypsum Board, Plastic Composite Fabrications, Plumbing, Project Management and Coordination, Roof Windows and Skylights, Roofing, Rough Carpentry, Scaffolding, Specialty Doors and Frames, Structural Steel, Tile, Translucent Wall and Roof Assemblies, Turntables, Vents, Wall Finishes, Window Wall Assemblies, Windows, Wood Framing
Johnson is a General Contractor that serves the Muscle Shoals, AL area and specializes in BIM and Model Making Services, Ceilings, Concrete, Countertops, Curtain Wall and Glazed Assemblies, Demolition, Design and Engineering, Door and Window Hardware, Doors and Frames, Dumbwaiters, Earthwork, Electrical, Electronic Security, Elevators, Entrances and Storefronts, Escalators and Moving Walks, Finish Carpentry, Flooring, General Construction Management, Glass and Glazing, Heating Ventilating and Air Conditioning HVAC, Landscaping, Lifts, Louvers, Masonry, Metals, Other Conveying Equipment, Painting and Coatings, Plaster and Gypsum Board, Plastic Composite Fabrications, Plumbing, Project Management and Coordination, Roof Windows and Skylights, Roofing, Rough Carpentry, Scaffolding, Specialty Doors and Frames, Structural Steel, Tile, Translucent Wall and Roof Assemblies, Turntables, Vents, Wall Finishes, Window Wall Assemblies, Windows, Wood Framing.
Company Logo

CG3D LLC

New York, NY • Alabama • Arizona • Arkansas • California • Delaware • Florida • Georgia • Illinois • Indiana • Iowa • Kentucky • Louisiana • Maryland • Massachusetts • Michigan • Minnesota • Missouri • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • Ohio • Oklahoma • Oregon • Pennsylvania • South Carolina • Tennessee • Texas • Utah • Virginia • Washington • West Virginia • Wisconsin
Consultant, Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional, Residential
3d Capture Scanning, Bim and Model Making Services, Building Information Modeling Bim, Design Coordination Services
Services: 3D Laser Scanning Scan to BIM (MEP, Architectural and Structural) MEP Pre Construction Coordination (Revit w/Fab parts) Welcome to CG3D, your premier destination for cutting-edge 3D scanning and MEP (Mechanical, Electrical, Plumbing) virtual coordination solutions. At CG3D, we are committed to revolutionizing the way you perceive and execute your projects. Harnessing the latest advancements in 3D scanning technology, CG3D captures every detail of your physical environment with unparalleled precision and accuracy. Whether you're dealing with architectural marvels, industrial complexes, or intricate historical sites, our state-of-the-art scanning techniques ensure that every dimension is faithfully represented in the digital realm. But our expertise doesn't end there. With our expertise in Building Information Modeling (BIM), CG3D specializes in seamless 3D MEP virtual coordination. By integrating mechanical, electrical, and plumbing systems into a unified digital model, we empower you to plan, visualize, and coordinate your project with unmatched efficiency and precision. At CG3D, we understand the critical importance of collaboration and precision in modern construction and engineering projects. Our solutions enable architects, engineers, contractors, and facility managers to streamline workflows, mitigate risks, and optimize resources throughout the project lifecycle. Experience the future of 3D scanning and MEP virtual coordination with CG3D. Partner with us, and let's transform your vision into reality, one precise detail at a time.
Company Logo

UtahBIM, LLC

DC, DC • Alabama • Alaska • Alberta • Arizona • Arkansas • British Columbia • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Manitoba • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Brunswick • New Hampshire • New Jersey • New Mexico • New York • Newfoundland and Labrador • North Carolina • North Dakota • Northwest Territories • Nova Scotia • Ohio • Oklahoma • Ontario • Oregon • Pennsylvania • Prince Edward Island • Québec • Rhode Island • Saskatchewan • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Consultant, Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional, Residential
3d Capture Scanning, Bim and Model Making Services, Building Information Modeling Bim, Construction Software Solutions, Design and Engineering, Design Coordination Services
UtahBIM is a consulting firm based in Provo, Utah, specializing in Building Information Modeling (BIM) and Virtual Design and Construction (VDC). Since 2023, our Utah-based team has helped general contractors and mechanical, electrical, plumbing, and fire protection (MEPF) subcontractors around the world streamline construction through 3D modeling, clash detection, and coordinated BIM services.

Top Cities in Alabama

Frequently Asked Questions

How many Bim and Model Making Services contractors in Alabama are on the Procore Construction Network?

There are currently 321 Bim and Model Making Services contractors in Alabama on the Procore Construction Network.

How can I find and connect with Bim and Model Making Services contractors in Alabama?

The Procore Construction Network allows you to search for Bim and Model Making Services contractors in Alabama that meet your business needs. Most companies provide a phone number or website on their business page so you can easily connect with them.

How can Bim and Model Making Services contractors in Alabama join the Procore Construction Network?

The Procore Construction Network is free and open to any businesses in the construction industry. Click Sign Up at the top of this page to submit your information and create your business page.

How do I know what areas Bim and Model Making Services contractors in Alabama cover?

Most businesses listed on the Procore Construction Network have updated their service area. Select a business to view a service area map and find what other areas they work in.

How do I invite Bim and Model Making Services contractors in Alabama on the Procore Construction Network to bid on projects?

The Procore platform offers a Bidding tool to Procore customers. If your company uses our Bidding solution, you can search and invite businesses on the Procore Construction Network directly from the Bidding tool. Not yet using Procore? Request a demo.

How many Bim and Model Making Services contractors in Alabama are on the Procore Construction Network?

There are currently 321 Bim and Model Making Services contractors in Alabama on the Procore Construction Network.

How can I find and connect with Bim and Model Making Services contractors in Alabama?

The Procore Construction Network allows you to search for Bim and Model Making Services contractors in Alabama that meet your business needs. Most companies provide a phone number or website on their business page so you can easily connect with them.

How can Bim and Model Making Services contractors in Alabama join the Procore Construction Network?

The Procore Construction Network is free and open to any businesses in the construction industry. Click Sign Up at the top of this page to submit your information and create your business page.

How do I know what areas Bim and Model Making Services contractors in Alabama cover?

Most businesses listed on the Procore Construction Network have updated their service area. Select a business to view a service area map and find what other areas they work in.

How do I invite Bim and Model Making Services contractors in Alabama on the Procore Construction Network to bid on projects?

The Procore platform offers a Bidding tool to Procore customers. If your company uses our Bidding solution, you can search and invite businesses on the Procore Construction Network directly from the Bidding tool. Not yet using Procore? Request a demo.