Metal Faced Panels Contractors in Los Angeles, CA

4,786 Results within

Market Sector
Company Type
Business Classification
Trades and Services (79)
Backing Boards and Underlayments
Batten Seam Sheet Metal Wall Cladding
Blanket Insulation
Blown Insulation
Board Insulation
Cast Polymer Fabrications
Cement Plastering
Curtain Wall and Glazed Assemblies
Custom Ornamental Simulated Woodwork
Direct Applied Finish Systems
Escalators
Escalators and Moving Walks
Exterior Insulation and Finish Systems Eifs
Exterior Planting Support Structures
Faced Panels
Facility Fuel Systems
Fireplace Specialties
Fireplaces and Stoves
Flashing and Trim
Flat Seam Sheet Metal Wall Cladding
Flexible Flashing
Fluid Applied Insulative Coating
Foamed In Place Insulation
Glass and Glazing
Glass Glazing
Glazed Aluminum Curtain Walls
Glazed Bronze Curtain Walls
Glazed Composite Curtain Wall
Glazed Stainless Steel Curtain Walls
Glazed Steel Curtain Walls
Glazed Timber Curtain Walls
Glazing Accessories
Glazing Surface Films
Gypsum Board
Gypsum Plastering
Heating Ventilating and Air Conditioning HVAC
HVAC Air Distribution System Cleaning
HVAC General
Instrumentation and Control For HVAC
Irrigation
Landscaping
Loose Fill Insulation
Manufactured Fireplaces
Metal Faced Panels
Mirrors
Moving Ramps
Moving Walks
Other Plastering
Planting Accessories
Planting Preparation
Plants
Plaster and Gypsum Board
Plaster and Gypsum Board Assemblies
Plaster Fabrications
Plastic Composite Fabrications
Plastic Composite Paneling
Plastic Composite Railings
Plastic Composite Trim
Plastic Foam Fabrications
Plastic Glazing
Polymer Based Exterior Insulation and Finish System
Polymer Modified Exterior Insulation and Finish System
Reflective Insulation
Sheet Metal Flashing and Trim
Sheet Metal Wall Cladding
Sloped Glazing Assemblies
Special Function Glazing
Sprayed Insulation
Standing Seam Sheet Metal Wall Cladding
Stoves
Structural Glass Curtain Walls
Structural Sealant Glazed Curtain Walls
Supports For Plaster and Gypsum Board
Thermal Insulation
Transplanting
Turf and Grasses
Veneer Plastering
Water Drainage Exterior Insulation and Finish System
Wetlands
Clear All Filters
Company Logo

Envo Solutions

DC, DC • Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maryland • Massachusetts • Michigan • Minnesota • Missouri • Nebraska • Nevada • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Architect, Engineer, General Contractor
Commercial, Healthcare, Infrastructure, Residential
Exterior Insulation and Finish Systems Eifs, Joint Sealants, Roof and Deck Insulation
Our company is focused on providing customized Metal Building Insulation Services to meet the changing needs of modern construction. With over 80 years of combined experience in Building Envelope Systems, we specialize in designing and integrating effective Building Envelope Insulation solutions for both commercial and residential projects. Our team offers expertise in Steel Building Insulation Services, utilizing Continuous Insulation Systems for improved thermal performance and energy efficiency. We provide reliable Roof Insulation Solutions and Wall Insulation Solutions that fit seamlessly into your building’s design. Whether it’s Commercial Building Insulation, Building Roof Insulation, or Building Wall Insulation, we deliver the right Building Insulation Solutions tailored to your needs. With our experience in Metal Building Insulation Systems, we ensure your building envelope is optimized for comfort and energy efficiency. We are here to deliver the best Building Envelope Solutions for your specific project requirements.
Company Logo

Fundermax North America

DC, DC • Alabama • Alaska • Alberta • Arizona • Arkansas • British Columbia • California • Colorado • Connecticut • Delaware • Florida • Georgia • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Manitoba • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Brunswick • New Hampshire • New Jersey • New Mexico • New York • Newfoundland and Labrador • North Carolina • North Dakota • Northwest Territories • Nova Scotia • Nunavut • Ohio • Oklahoma • Ontario • Oregon • Pennsylvania • Prince Edward Island • Québec • Rhode Island • Saskatchewan • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Supplier
Commercial, Healthcare
Fabricated Wall Panel Assemblies, Faced Panels, Interior Wall Paneling, Soffit Panels, Wall Panels
Fundermax North America specializes in high-quality phenolic panels - also known as high-pressure laminates (HPL) - designed for exterior façades, interior spaces, and laboratory environments. Our panels are renowned for their durability, weather resistance, design versatility, and resistance to weather, UV rays, chemicals, and graffiti, making them ideal for applications ranging from rainscreen façades and soffits to interior wall cladding and lab work surfaces. With a commitment to sustainability, our products are crafted from renewable raw materials and hold multiple ISO certifications. Our products are FSC-certified and contribute to LEED standards, ensuring eco-friendly solutions without compromising on performance or aesthetics. Headquartered in Charlotte, NC, we are the North American branch of Fundermax, a global leader in phenolic panel manufacturing with over a century of experience.​
Company Logo

Noontide Service Corporation USA INC

Calgary, AB • DC, DC • LA, CA • Alabama • Alaska • Arizona • Arkansas • British Columbia • California • Colorado • Connecticut • Delaware • Florida • Georgia • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Ontario • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
General Contractor, Specialty Contractor, Supplier
Commercial, Healthcare, Institutional, Residential
Carpeting, Ceilings, Ceramic Tiling, Concrete, Electrical, Electrical Design and Engineering, Electrical General, Entrances and Storefronts, Facility Maintenance and Operation Equipment, Fences and Gates, Flooring, General Construction Management, Glass and Glazing, HVAC Air Distribution System Cleaning, HVAC General, Landscaping, Masonry, Mirrors, Painting, Plumbing, Plumbing General, Project Management, Project Management and Coordination, Roofing, Vents, Waterproofing, Windows
Noontide Service Corporation USA INC is a General Contractor, Specialty Contractor, Supplier that serves the Fort Lauderdale, FL area and specializes in Carpeting, Ceilings, Ceramic Tiling, Concrete, Electrical, Electrical Design and Engineering, Electrical General, Entrances and Storefronts, Facility Maintenance and Operation Equipment, Fences and Gates, Flooring, General Construction Management, Glass and Glazing, HVAC Air Distribution System Cleaning, HVAC General, Landscaping, Masonry, Mirrors, Painting, Plumbing, Plumbing General, Project Management, Project Management and Coordination, Roofing, Vents, Waterproofing, Windows.
Company Logo

Design Team Sign Company

New York, NY • Washington, DC • Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Specialty Contractor
Commercial
Architectural Wood Casework, Countertops, Design and Engineering, Design Coordination Services, Exterior Specialties, Fabricated Wall Panel Assemblies, Fixed Louvers, Flags and Banners, Flashing and Trim, Flat Seam Sheet Metal Wall Cladding, Flexible Flashing, Forming, Furnishings, Furniture, Furniture Accessories, Interior Design, Interior Specialties, Manufactured Exterior Specialties, Metal Countertops, Other Furnishings, Project Management, Project Management and Coordination, Sheet Metal Flashing and Trim, Signage, Temporary Signage, Wood Countertops, Wood Doors and Frames, Wood Trim
The Company was started in 1993 by a local family; two brothers, Chris and Keith Pierce, who remain the current Owners and General Managers. The small business which started as a graphic advertisement provider quickly grew into a full-service vinyl and graphic company, providing products to different customers and industries. In 1994, the Owners increased their product lines by purchasing and developing a screen-printing department with direct mail catalogs targeting real estate agents nationwide for the sale of real estate yard signs. Around this same time, another local business provided an avenue for manufacturing awnings for a national restaurant chain. This new venture quickly grew from one customer, one product to several customers, increasing our number of employees from 5 to 20 by 1997. With the experience, skilled labor, and opportunities, the Company realized a market niche causing expansion into manufacturing large signage products, which were not readily available from a single supplier. Customers requiring reimaging needs were required to purchase products from several different suppliers, depending on the products. Most suppliers focused on one or two products, such as awnings, channel letters, pylons, and a completely different supplier for the installation of products. Over the next 10 years, the Company was introduced to McAlister’s Deli and Restaurant Franchisee Owners and began providing a complete signage package for this customer. Experience and business relationships developed allowing partnerships with other National, Corporate Accounts, including retail businesses, providing annual revenue increases, of as much as 50%, with the Company doubling in size from 2002 to 2005. Our Company quickly realized an obvious opportunity to provide customers with a complete “One-Source” supplier approach for all signage, branding, and construction needs. As a result, the Owners began the colossal task of recruiting additional, high-skilled, and passionate candidates to develop a complete project management team, with a “professional and structured” approach to business. The Company focused on operational procedures and processes, training, and in return experienced opportunistic growth and support of customers and clients from different markets, industries, and areas nationwide. The Company operated in several locations from 1993 to 2003, moving into larger offices and facilities to accommodate growth. In 2003, the Company purchased a 193,000 square feet facility which served as its headquarters office for administration, manufacturing, warehousing, and logistics. By 2016 the Company began struggling to keep up with growing customer demand due to space constrictions, primarily for manufacturing and material warehousing and staging of products prior to delivery. Additionally, a long-term business partner opened up the possibility of a new revenue source in commercial construction. The Company realized with the first construction projects that substantially more space would be necessary. The search for a new location began in 2017 and included buildings and properties in Western Kentucky, North Mississippi, Southeast Arkansas as well as Tennessee. The most promising existing building and property was located in McNairy County, which borders Hardin County, only 12 miles of the current facility. By remaining within driving distance, this property would help retain tenured employees as well as provide a broader recruiting range for future employment opportunities. However, after months of research, inspection, and negotiations, it was clear that this property was not the best choice. After careful reflection, the Owners agreed that the Company should remain within Hardin County. Hardin County had supported the Company during growth and expansions, providing irreplaceable banking partners, dependable vendors and suppliers, and the best employees anywhere in the State of TN. The decision was made to purchase land and build a new facility and the work began.
Company Logo

ELA LIGHTING

Boston, MA • New Orleans, LA • Orem, UT • Washington, DC • Alabama • Arizona • Arkansas • California • Colorado • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kentucky • Louisiana • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • South Carolina • South Dakota • Tennessee • Texas • Utah • Washington • Wisconsin • Wyoming
Consultant, Engineer, Specialty Contractor, Supplier
Commercial, Industrial and Energy, Infrastructure, Institutional, Residential
Amusement Park Structures and Equipment, Art, Cast Polymer Fabrications, Decorative Finishing, Decorative Metal Fences and Gates, Design and Engineering, Electrical, Informational Kiosks, Manufactured Site Specialties, Metal Fabrications, Metal Faced Panels, Metals, Project Management and Coordination, Signage, Visual Display Units
A Legacy of Craftsmanship and Innovation in Lighting. Environmental Lighting for Architecture, Inc. (ELA) traces its roots back to 1929, when a group of skilled craftsmen founded the Hollywood Lighting Fixture Company (HLFC). Known for creating high-end decorative lighting for film sets, HLFC quickly gained recognition among Hollywood's elite—including directors like Alfred Hitchcock—and became the go-to source for stunning, custom fixtures used in motion pictures. ​ This reputation for excellence soon extended beyond the silver screen. Architects and designers throughout Southern California sought HLFC’s artistry, especially as the demand for sophisticated, European-inspired custom commercial lighting grew. By the 1950s, HLFC had expanded into the hospitality sector, contributing elegant lighting solutions to the booming hotel scene in Las Vegas. To better reflect its growing scope, the company rebranded as Custom and Architectural Lighting (CAL). CAL continued to deliver innovative lighting to luxury hotels while also restoring historic properties, including landmark government buildings and state capitols. ​ In the late 1970s, CAL partnered with Environmental Lighting for Architecture, Inc., a boutique outdoor lighting manufacturer known for its quality and design. The collaboration led to a full merger, and the combined company adopted the ELA name. Together, they expanded into residential outdoor lighting, while the custom division continued to influence new product lines with fresh design concepts and architectural integrity. ​ By 1982, ELA had relocated to City of Industry, California, and developed a network of high-end lighting showrooms nationwide. This move positioned the company for rapid growth and greater market reach. ​ To meet rising demand for aluminum castings, ELA established its own foundry, Fundidora Cal, in Tijuana, Mexico, in 1990. With weekly aluminum shipments from the U.S. and stringent quality controls, this vertical integration allowed ELA to maintain consistent production schedules and exceptional craftsmanship. ​ In 2022, ELA moved to a state-of-the-art manufacturing facility in Corona, California, marking a new chapter in its ongoing commitment to quality, flexibility, and innovation. ​ Today, ELA continues to offer the same attention to detail, distinctive designs, and legendary service that first made it a Hollywood favorite nearly a century ago. With advanced custom capabilities, ELA is equipped to meet the complex needs of modern commercial, hospitality, and residential projects—one fixture at a time. ​

Frequently Asked Questions

How many Metal Faced Panels contractors in Los Angeles, CA are on the Procore Construction Network?

There are currently 4,786 Metal Faced Panels contractors in Los Angeles, CA on the Procore Construction Network.

How can I find and connect with Metal Faced Panels contractors in Los Angeles, CA?

The Procore Construction Network allows you to search for Metal Faced Panels contractors in Los Angeles, CA that meet your business needs. Most companies provide a phone number or website on their business page so you can easily connect with them.

How can Metal Faced Panels contractors in Los Angeles, CA join the Procore Construction Network?

The Procore Construction Network is free and open to any businesses in the construction industry. Click Sign Up at the top of this page to submit your information and create your business page.

How do I know what areas Metal Faced Panels contractors in Los Angeles, CA cover?

Most businesses listed on the Procore Construction Network have updated their service area. Select a business to view a service area map and find what other areas they work in.

How do I invite Metal Faced Panels contractors in Los Angeles, CA on the Procore Construction Network to bid on projects?

The Procore platform offers a Bidding tool to Procore customers. If your company uses our Bidding solution, you can search and invite businesses on the Procore Construction Network directly from the Bidding tool. Not yet using Procore? Request a demo.

How many Metal Faced Panels contractors in Los Angeles, CA are on the Procore Construction Network?

There are currently 4,786 Metal Faced Panels contractors in Los Angeles, CA on the Procore Construction Network.

How can I find and connect with Metal Faced Panels contractors in Los Angeles, CA?

The Procore Construction Network allows you to search for Metal Faced Panels contractors in Los Angeles, CA that meet your business needs. Most companies provide a phone number or website on their business page so you can easily connect with them.

How can Metal Faced Panels contractors in Los Angeles, CA join the Procore Construction Network?

The Procore Construction Network is free and open to any businesses in the construction industry. Click Sign Up at the top of this page to submit your information and create your business page.

How do I know what areas Metal Faced Panels contractors in Los Angeles, CA cover?

Most businesses listed on the Procore Construction Network have updated their service area. Select a business to view a service area map and find what other areas they work in.

How do I invite Metal Faced Panels contractors in Los Angeles, CA on the Procore Construction Network to bid on projects?

The Procore platform offers a Bidding tool to Procore customers. If your company uses our Bidding solution, you can search and invite businesses on the Procore Construction Network directly from the Bidding tool. Not yet using Procore? Request a demo.