Industrial and Energy Contractors in Tennessee

5,103 Results

Market Sector (1)
Company Type
Business Classification
Trades and Services
Industrial and Energy
Clear All Filters
Company Logo

Facility Commissioning Group, Inc.

Indiana • Kentucky • Ohio • Tennessee • West Virginia
Consultant
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional
Commissioning
Facility Commissioning Group offers an advocacy service to Owners and Operators of buildings which provides a high level of assurance for proper installation and operation of systems within performance tested guidelines set forth in the design intent documents. Facility Commissioning Group affords the Owner an unbiased perspective of system installation, operation and performance, and monitors specified systems service and training events. The commissioning process does not alter the responsibilities of design professionals, installing contractors or their vendors, but rather augments the efforts of these parties toward the common goal of achieving a quality product that promotes the delivery of a safe, healthy environment for building occupants by turning over functionally tested systems with appropriate documentation and training for owners and operators. Facility Commissioning Group bridges the gaps between the Owner, the Design Team, the Construction Team, and Vendors using a process employing: Thorough review of design and submittal documents Progress and coordination meeting attendance Resolution tracking forms System verification checklists Start-up involvement for equipment Functional performance testing O&M and as-built documentation corroboration Specified factory service and off-season mode testing enforcement O&M training facilitation and recording Integration of subsystems to perform as a cohesive overall system Point of contact references for warranty action A final commissioning report, including an executive summary Facility Commissioning Group employs ASHRAE Standard 202 – 2013: Commissioning Process for Buildings and Systems; ASHRAE Guideline 0 – 2005: The Commissioning Process and ASHRAE Guideline 1.1-2007: The HVAC&R Technical Requirements for the Commissioning Process, ASHRAE Guideline 3: Exterior Enclosure Technical Requirements for The Commissioning Process as the bases of our process and our work conforms to the best practices outlined in the Associated Air Balance Council Commissioning Group (ACG) Commissioning Guideline – 2005. Facility Commissioning Group is a member of the U.S. Green Building Council, and our commissioning process adheres to the requirements of the Leadership in Energy and Environmental Design (LEED) Green Building Rating System – specifically to Energy and Atmosphere (EA) credits, Fundamental Commissioning of the Building Energy Systems, and Enhanced Commissioning. FCG Mission Statement: Strive to achieve “optimal performance through accountability” by developing and executing state of the art commissioning process. FCG Statement of Independence: Facility Commissioning Group does not conduct non-commissioning business: we do not design, construct, or manage in other venues; therefore, our professional relationships are developed and maintained through the commissioning context.
Company Logo

Ataccon LLC

Washington, DC • Alabama • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional
Access Flooring, Acoustic Ceilings, All Glass Entrances and Storefronts, Controlled Environment Rooms, Fabricated Faced Panel Assemblies, Fabricated Rooms, Fabricated Wall Panel Assemblies, Metal Faced Panels, Metal Wall Panels, Modular Mezzanines, Special Function Ceilings, Special Purpose Rooms, Specialty Ceilings, Zinc Siding
Ataccon LLC is a Specialty Contractor that serves the Ashburn, VA area and specializes in Controlled Environment Rooms, Modular Mezzanines, Specialty Ceilings, Metal Wall Panels, Special Purpose Rooms, Acoustic Ceilings, Fabricated Wall Panel Assemblies, Special Function Ceilings, All Glass Entrances and Storefronts, Fabricated Faced Panel Assemblies, Zinc Siding, Fabricated Rooms, Metal Faced Panels, Access Flooring.

C & L Opening Solutions LLC

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • District of Columbia • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin
Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional
Ceilings, Countertops, Curtain Wall and Glazed Assemblies, Door and Window Hardware, Doors and Frames, Entrances and Storefronts, Finish Carpentry, Flooring, Glass and Glazing, Louvers, Metals, Painting and Coatings, Plaster and Gypsum Board, Plastic Composite Fabrications, Roof Windows and Skylights, Specialty Doors and Frames, Tile, Translucent Wall and Roof Assemblies, Vents, Wall Finishes, Window Wall Assemblies, Windows
C & L Opening Solutions LLC is a Specialty Contractor that serves the Fort Worth, TX area and specializes in Door and Window Hardware, Window Wall Assemblies, Metals, Windows, Plastic Composite Fabrications, Plaster and Gypsum Board, Glass and Glazing, Translucent Wall and Roof Assemblies, Flooring, Specialty Doors and Frames, Painting and Coatings, Countertops, Roof Windows and Skylights, Louvers, Vents, Ceilings, Wall Finishes, Entrances and Storefronts, Doors and Frames, Curtain Wall and Glazed Assemblies, Finish Carpentry, Tile.
Company Logo

Heat Tech Industrial

DC, DC • Alabama • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional
Blanket Insulation, Board Insulation, Estimating, Fabricated Engineered Structures, Fabricated Faced Panel Assemblies, Fabricated Panel Assemblies With Siding, Fabricated Wall Panel Assemblies, Heating Ventilating and Air Conditioning HVAC, High Performance Coatings, Metal Faced Panels, Metal Wall Panels, Painting, Painting and Coatings, Plumbing, Polymer Based Exterior Insulation and Finish System, Polymer Modified Exterior Insulation and Finish System, Preconstruction Bidding, Process Gas and Liquid Handling Purification and Storage Equipment, Process Heating Cooling and Drying Equipment, Process Piping, Process Piping System Protection, Project Management and Coordination, Protective Covers, Reflective Insulation, Refractory Masonry, Roof Panels, Roofing, Scaffolding, Sheet Metal Flashing and Trim, Sheet Metal Roofing, Sheet Metal Wall Cladding, Shoring and Underpinning, Siding, Special Coatings, Standing Seam Sheet Metal Wall Cladding, Steam Process Piping, Structural Steel, Suspended Scaffolding, Temporary Scaffolding and Platforms, Temporary Swing Staging, Thermal Insulation, Translucent Wall and Roof Assemblies
Contractor Specializing in Mechanical Insulation, Heat Trace, Refractory, Scaffolding, Siding and Roofing, and Coatings
Company Logo

Berg Group

Alabama • Arizona • California • Colorado • Florida • Georgia • Illinois • Indiana • Iowa • Michigan • Minnesota • Mississippi • Montana • North Carolina • North Dakota • Ohio • Oregon • South Carolina • South Dakota • Tennessee • Texas • Washington • Wisconsin
Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional
Acoustic Ceilings, Air Barriers, Applied Fire Protection, Blanket Insulation, Board Insulation, Building Information Modeling Bim, Ceilings, Cement Plastering, Direct Applied Finish Systems, Estimating, Exterior Insulation and Finish Systems Eifs, Fabricated Wall Panel Assemblies, Fiber Cement Siding, Firestopping, Gypsum Board, Gypsum Plastering, Integrated Construction, Interior Specialties, Joint Sealants, Metal Faced Panels, Metal Wall Panels, Painting, Painting and Coatings, Partitions, Plaster and Gypsum Board, Plaster and Gypsum Board Assemblies, Preconstruction Bidding, Project Management and Coordination, Rough Carpentry, Sheathing, Thermal Insulation, Wall Coverings, Wood Framing
Berg Group is a Specialty Contractor that serves the Chaska, MN area and specializes in Thermal Insulation, Partitions, Estimating, Metal Wall Panels, Cement Plastering, Joint Sealants, Plaster and Gypsum Board Assemblies, Fiber Cement Siding, Project Management and Coordination, Acoustic Ceilings, Fabricated Wall Panel Assemblies, Exterior Insulation and Finish Systems Eifs, Plaster and Gypsum Board, Wood Framing, Board Insulation, Rough Carpentry, Painting and Coatings, Interior Specialties, Gypsum Plastering, Direct Applied Finish Systems, Wall Coverings, Ceilings, Blanket Insulation, Building Information Modeling BIM, Gypsum Board, Preconstruction Bidding, Painting, Sheathing, Applied Fire Protection, Metal Faced Panels, Integrated Construction, Air Barriers, Firestopping.

Top Cities in Tennessee

Frequently Asked Questions

How many Industrial and Energy contractors in Tennessee are on the Procore Construction Network?

There are currently 5,103 Industrial and Energy contractors in Tennessee on the Procore Construction Network.

How can I find and connect with Industrial and Energy contractors in Tennessee?

The Procore Construction Network allows you to search for Industrial and Energy contractors in Tennessee that meet your business needs. Most companies provide a phone number or website on their business page so you can easily connect with them.

How can Industrial and Energy contractors in Tennessee join the Procore Construction Network?

The Procore Construction Network is free and open to any businesses in the construction industry. Click Sign Up at the top of this page to submit your information and create your business page.

How do I know what areas Industrial and Energy contractors in Tennessee cover?

Most businesses listed on the Procore Construction Network have updated their service area. Select a business to view a service area map and find what other areas they work in.

How do I invite Industrial and Energy contractors in Tennessee on the Procore Construction Network to bid on projects?

The Procore platform offers a Bidding tool to Procore customers. If your company uses our Bidding solution, you can search and invite businesses on the Procore Construction Network directly from the Bidding tool. Not yet using Procore? Request a demo.

How many Industrial and Energy contractors in Tennessee are on the Procore Construction Network?

There are currently 5,103 Industrial and Energy contractors in Tennessee on the Procore Construction Network.

How can I find and connect with Industrial and Energy contractors in Tennessee?

The Procore Construction Network allows you to search for Industrial and Energy contractors in Tennessee that meet your business needs. Most companies provide a phone number or website on their business page so you can easily connect with them.

How can Industrial and Energy contractors in Tennessee join the Procore Construction Network?

The Procore Construction Network is free and open to any businesses in the construction industry. Click Sign Up at the top of this page to submit your information and create your business page.

How do I know what areas Industrial and Energy contractors in Tennessee cover?

Most businesses listed on the Procore Construction Network have updated their service area. Select a business to view a service area map and find what other areas they work in.

How do I invite Industrial and Energy contractors in Tennessee on the Procore Construction Network to bid on projects?

The Procore platform offers a Bidding tool to Procore customers. If your company uses our Bidding solution, you can search and invite businesses on the Procore Construction Network directly from the Bidding tool. Not yet using Procore? Request a demo.